Operation Manual

Cerberus P 6381-2
30
strongly recommended that you choose this option to encrypt your wireless network. The
encryption settings are described below.
Security Type - You can select one of the following encryption/authentication methods.
Security options depends on option selected from this list:
• WEP
Security Option – Select authentication method:
• Automatic – Authentication method depends on the wireless station request.
• Shared Key – WEP Key required to authenticate the wireless station.
• Open system – Any wireless station can connect to this wireless network.
WEP Key Format – You can select ASCII or Hexadecimal format. ASCII Format stands
for any combination of keyboard characters in the specified length. Hexadecimal format
stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
Key Selected - Select which of the four keys will be used.
WEP Key - Enter the matching WEP key information for your network in the selected key
radio button. These values must be identical on all wireless stations in your network.
Key Type – WEP key length (64-bit, or 128-bit, or 152-bit) for authentication. Disabled
means this WEP key entry is invalid. Note: If you do not set the key, the wireless security
function is still disabled even if you have selected Shared Key as Authentication Type.
• 64-bit – You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F) or 5
ASCII characters.
• 128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or
13 ASCII characters.
• 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F) or
16 ASCII characters.
Click the Save button to save this settings.