Operation Manual

Cerberus P 6381-2

Wireless / Wireless Settings

SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all

wireless devices in your network. It is strongly recommended that you change your networks

name (SSID) to a different than default value. SSID is case-sensitive. For example, MYSSID is

NOT the same as MySsid.

Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the router can be used. It may be illegal to use the wireless function of the

router in a region other than one of those specified in this field. If your country or region is not

listed, please contact your local government agency for assistance.

Channel - This field determines which operating frequency will be used. It is not necessary to

change the wireless channel unless you notice interference problems with another nearby

access point.

Mode - Select the desired wireless mode. The options are:

• 54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the

router.

• 11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.

Enable Wireless Router Radio - The wireless radio of the router can be enabled or disabled

to allow wireless stations access. If enabled, the wireless stations will be able to access the

router, otherwise, wireless stations will not be able to access the router.

Enable SSID Broadcast - If you select this checkbox, the Wireless router will broadcast its

name (SSID) on the air.

Enable Wireless Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption. It is