Operation Manual

Cerberus P 6381-2

you want your Internet connection to remain active at all times, enter 0 in the Max Idle

Time field. Otherwise, enter the number of minutes you want to have elapsed before your

Internet connection terminates. Note: Sometimes the connection cannot be disconnected

although you specify a time to Max Idle Time because some applications visit the

Internet continually in the background.

Connect Automatically - Connect automatically after the router is disconnected. To use

this option, click the radio button.

Connect Manually - You can configure the router to make it connect or disconnect

manually. After a specified period of inactivity (Max Idle Time), the router will disconnect

your Internet connection, and not be able to re-establish your connection automatically as

soon as you attempt to access the Internet again. To use this option, click the radio

button. If you want your Internet connection to remain active at all times, enter 0 in the

Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the

Internet connecting last unless a new link requested. Note: Sometimes the connection

cannot be disconnected although you specify a time to Max Idle Time because some

applications visit the Internet continually in the background.

Click the Save button to save this settings.

Network / MAC Clone

Some ISPs require that you register the MAC Address of your adapter, which is connected to

your cable or DSL modem during installation. Usually, you do not need to change anything

here.

WAN MAC Address - This field displays the current MAC address of the WAN port, which is

used for the WAN port. If your ISP requires that you register the MAC address, please enter

the correct MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-

XX (X is any hexadecimal digit).

Restore Factory MAC - Click this button and the factory MAC address will fill in the WAN

MAC Address field.

Your PC's MAC Address - This field displays the MAC address of the PC that is currently

managing the router.

Clone MAC Address - If the MAC address in Your PC's MAC Address field is desired, you

can click this button and this MAC address will fill in the WAN MAC Address field.

Click the Save button to save this settings.