Operation Manual

Cerberus P 6381-2
18
Region – Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of the
router in a region other than one of those specified in this field.
Channel – The current channel in use. This field determines which operating frequency will be
used.
Mode - Select the desired wireless mode. The options are:
• 108Mbps (Dynamic) - Super G™, 802.11g and 802.11b wireless stations can connect to
the router.
• 108Mbps (Static) - Only Super G™ wireless stations can connect to the router.
• 54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
router.
• 11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.
Click the Next button to continue.
Quick Setup - Finish
Click the Finish button to save changes and exit Quick setup.
Network / LAN
MAC Address – MAC address used by router in LAN.
IP Address – Enter IP address which will be used by router in LAN.
Subnet Mask – Select LAN subnet mask.