Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)
8
Back Panel
Label Used for...
RP-SMA Connector Connecting the external antenna
LINE (RJ-11) Connecting the telephone cable
LAN 1-4 (RJ-45) Connecting with computers/devices through Ethernet cable
RESET Resetting the device.
PWR Connecting with supplied power adapter
ON/OFF Switching the device on/off
Default Settings
Before changing configuration familiarize yourself with these default settings.
IP Address 192.168.1.100
Subnet Mask 255. 255. 255.0
SSID Pentagram P 6331-6
DHCP Server Enabled
DHCP Server IP Address Pool
100 IP addresses
from 192.168.1.101
IP Address Lease Time 43200 seconds (12 hours)
User Name admin
Password pentagram
It is recommended to set username and password as soon as possible.
If you ever forget the password to log in, you may need to reset router to restore the factory
default settings. This procedure is described on the next page.