Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)

Problems with the Internet Access

I cannot access the Internet:

1. Make sure the router is turned on and connected to the network;

2. If the ADSL LED is off, refer to Section ADSL LED of this troubleshooting;

3. Verify your WAN settings;

4. Make sure you entered the correct user name and password;

5. For wireless stations, check that both the router and wireless station(s) are using the

same ESSID, channel and encryption keys (if encryption is activated).

Internet connection disconnects:

1. If you use PPPoA or PPPoE encapsulation, check the idle time-out setting;

2. Contact your ISP.

If you have any troubles to configure or setup this ADSL Ethernet Router, please feel free to