Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)
60
Save Configuration to Flash Tab
After changing the router’s configuration settings, you must save all of the configuration
parameters to FLASH to avoid losing them after turning off or resetting your router. Click Save
to write your new configuration to FLASH.
Restart Tab
Click Restart with option Current Settings to reboot your router (and restore your last
saved configuration).
If you wish to restart the router using the factory default settings (for example, after a firmware
upgrade or if you have saved an incorrect configuration), select Factory Default Settings to
reset to factory default settings.
You may also reset your router to factory settings by holding in the small Reset pinhole button
on the back of your router for 10-12 seconds while the router is turned on.