Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)
28
Configuration / WAN (Wide Area Network)
A WAN (Wide Area Network) is an outside connection to another network or the Internet.
There are three items within the WAN section: ISP, DNS and ADSL.
• ISP
The factory default is PPPoA. If your ISP uses this access protocol, click Edit to input
other parameters as below. If your ISP does not use PPPoA, you can change the default
WAN connection entry by clicking Change.
A simpler alternative is to select Quick Start from the main menu on the left. See the
Quick Start section of the manual for more information.
RFC 1483 Routed Connections
Description – Your description of this connection.
VPI / VCI – Enter the information provided by your ISP.
NAT – The NAT (Network Address Translation) feature allows multiple users to access
the Internet through a single IP account, sharing the single IP address. If users on your
LAN have public IP addresses and can access the Internet directly, the NAT function can
be disabled.
Encapsulation method – Select the encapsulation format, the default is LLC Bridged.
Select the one provided by your ISP.