Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)

To disable the router’s DHCP Server, check Disabled and click Next then click Apply.

When the DHCP Server is disabled you need to manually assign a fixed IP address to

each PC on your network, and set the default gateway for each PC to the IP address of

the router (the default is 192.168.1.254).

To configure the router’s DHCP Server, check DHCP Server and click Next. You can

then configure parameters of the DHCP Server including the IP pool (starting IP address

and ending IP address to be allocated to PCs on your network), lease time for each

assigned IP address (the period of time the IP address assigned will be valid), DNS IP

address and the gateway IP address. These details are sent to the DHCP client (i.e. your

PC) when it requests an IP address from the DHCP server. Click Apply to enable this

function. If you check Use Router as a DNS Server, the ADSL Router performs the

domain name lookup, finds the IP address from the outside network automatically and

forwards it back to the requesting PC in the LAN (your Local Area Network).