Operation Manual

Cerberus ADSL2 Wi-Fi Plus (P6331-6)

Configuraton Tab

Click this item to access the following sub-items that configure the ADSL router: LAN, WAN,

System, Firewall, QoS, Virtual Server and Advanced. These functions are described in the

following sections.

Configuration / LAN (Local Area Network)

A Local Area Network (LAN) is a shared communication system to which many computers are

attached and is limited to the immediate area, usually the same building or floor of a building.

There are four items within the LAN section: Ethernet, Wireless, Wireless Security and

DHCP Server.

• Ethernet

The router supports two Ethernet IP addresses in the LAN, and two different LAN

subnets through which you can access the Internet at the same time. Users usually only

have one subnet in their LAN, so there is no need to configure a Secondary IP address.

The default IP address for the router is 192.168.1.254.

RIP – RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.

Note: The Subnet mask of the Secondary IP Address depends on the setting of the

Primary IP Address.