Operation Manual

Cerberus ADSL2+ Wi-Fi (P 6331-5)
8
Back Panel
Label Used for...
ADSL (RJ-11) Connecting the telephone cable
ETHERNET 1-4 (RJ-45) Connecting with computers/devices through Ethernet cable
RESET Resetting the device. Press for 10 seconds to reset
9V DC Connecting with supplied power adapter (9V 1A)
ON/OFF Switching the device on/off
Default Settings
Before changing configuration familiarize yourself with these default settings.
IP Address 192.168.1.1
Subnet Mask 255. 255. 255.0
SSID yournetworkname
DHCP Server Enabled
DHCP Server IP Address Pool
253 IP addresses
from 192.168.1.2
IP Address Lease Time 3600 seconds (1 hour)
User Name admin
Password admin
It is recommended to set username and password as soon as possible.
If you ever forget the password to log in, you may need to reset router to restore the factory
default settings. This procedure is described on the next page.