Operation Manual

Cerberus ADSL2+ Wi-Fi (P 6331-5)

•

••

• Static

The Ingress - Static page enables you to configure a static CoS for all packets received

on a WAN or LAN interface.

Interface – Select the interface here to configure the CoS for incoming traffic.

Class of Service – The selections are (in the order of descending priority): CoS1, CoS2,

CoS3, CoS4, CoS5, and CoS6.

QoS / QoS Shaper Configuration

Three shaper algorithms are supported:

• HTB

• Low Latency Queue Discipline

• PRIOWRR

Note: Egress TCA is required if shaper is configured for that interface.

Interface – The selections are WAN/LAN interfaces except WLAN, which does not support

Shaper feature. This field needs to be selected before shaper configuration.