Operation Manual

Cerberus ADSL2+ Wi-Fi (P 6331-5)

Application / TR-069

The TR-069 page allows you to set up connection parameters that cannot be seen by end

users. TR-069 is CPE (Customer Premise Equipment) Management Protocol from WAN side,

intended for communication between a CPE and Auto-Configuration Server (ACS). The CPE

WAN Management Protocol defines a mechanism that encompasses secure auto-

configuration of a CPE, and also incorporates other CPE management functions into a

common framework.

The CPE WAN Management Protocol is intended to support a variety of functionalities to

manage a collection of CPE, including the following primary capabilities:

• Auto-configuration and dynamic service provisioning

• Software/firmware image management

• Status and performance monitoring

• Diagnostics

ACS URL –Address of ACS server.

Periodic Inform Enabled – Select this option if you want to enable Periodic Inform.

Periodic Inform Interval – Enter Periodic Inform Interval time.

ACS Connect – Click to connect to the ACS. When a connection is established, the ACS

updates the ACS URL, Periodic Inform Enabled, and Periodic Inform Interval.

ACS Connection Request – Username and Password needed to connect to the ACS, it is

best to leave this fields unchanged.