Operation Manual

Cerberus P 6331-4A

• High Speed Internet Access: downstream rates of up to 24Mbps and upstream rates of

up to 1Mbps. Cerberus ADSL2+ Lite is compliant with the following standards: ANSI

T1.413 issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), G.994.1 (G.hs,

Multimode), ITU-T G.992.3 (ADSL2 G.dmt.bis), ITU-T G.992.5 (ADSL2+; Annex A, I, J, L

& M).

• Multi-Protocol to Establish a Connection: The router supports PPPoA (RFC 2364 - PPP

over ATM Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM (bridged or

routed), PPP over Ethernet (RFC 2516) and IPoA (RFC1577) to establish a connection

with an ISP. The router also supports VC-based and LLC-based multiplexing.

Product Overview

Important Notes

• Do not use the router in high humidity or high temperatures.

• Do not use the same power source for the router as other equipment.

• Do not repair or open the case by yourself. If the router is too hot, turn off

the power immediately and have it repaired at a qualified service center.

• Avoid using this product and all accessories outdoors.

• Place the router on a stable surface.

• Only use the power adapter that comes with the package. Using a

different voltage rating power adaptor may damage the router.

Front Panel

LED Description

1 LAN1

2 LAN2

3 LAN3

4 LAN4

Steady glow when connected to an Ethernet device.

Glows green for 100Mbps; Orange for 10Mbps.

Blinking light when data is Transmitted / Received.

5 ADSL

Lights when successfully connected to an ADSL DSLAM

Blinking when router is trying to connect to a DSLAM.

6 WLAN

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

7 PWR Lights when the power is ON.