Operation Manual

Cerberus P 6331-4A
37
QoS
QoS (Quality of Service) will provide better service of selected network traffic over various
technologies. Deploying QoS management to guarantee that all application receive the service
levels required and sufficient bandwidth to meet performance expectations is indeed one
important aspect of modem enterprise network.
QoS – Choose whether QoS will be Activated or Deactivated.
Summary – Click on QoS Settings Summary button to open summary window.
Rule – Parameters set in this paragraph describes which packets will apply to this rule.
• Rule Index – Select QoS rule to edit.
• Active – Choose whether selected QoS rule will be Activated or Deactivated.
• Application – Choose application protocol for this Rule: IGMP, SIP, H.323, MGCP,
SNMP, DNS, DHCP, RIP, RSTP, RTCP or RTP.
• Physical Ports – Choose WLAN / Ethernet ports that will use this rule.
• Destination MAC – Enter destination physical address (MAC).
• IP – Enter destination IP address.
• Mask – Enter destination subnet mask.