Operation Manual

Cerberus P 6331-4A
19
• PPPoE/PPPoA
Configure connection based on PPPoE / PPPoA protocol.
Enter Username, Password, VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier)
and select your Connection Type from the dropdown list. Note that you must enter the
user name exactly as your ISP assigned it. If the assigned name is in the form of
user@domain where domain identifies a service name, enter it exactly as given.
Click on BACK to return to the previous screen, on NEXT to continue, or on EXIT to exit
the wizard without saving.
• Bridge Mode
RFC 1483 explains two methods for Multi-protocol Encapsulation over AAL5. The first
method allows multiplexing of multiple protocols over just one ATM virtual circuit (LLC-
based multiplexing). The second method assumes that each individual protocol is carried
over a separate ATM virtual circuit (VC-based multiplexing). Please refer to RFC 1483 for
more information.
Enter VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) and select your
Connection Type from the dropdown list. Your ISP should provide the above
information.
Click on BACK to return to the previous screen, on NEXT to continue, or on EXIT to exit
the wizard without saving.