Operation Manual

Cerberus P 6331-4A
18
• Dynamic IP Address
A dynamic IP address connection requests a new IP address from your ISP each time
you connect to it.
Enter VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) and select your
Connection Type from the dropdown list. Your ISP should provide the above
information.
Click on BACK to return to the previous screen, on NEXT to continue, or on EXIT to exit
the wizard without saving.
• Static IP Address
A static IP address connection uses the same IP each time you connect to your ISP.
Enter VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier), IP Address, Subnet
mask, ISP Gateway and select your Connection Type from the dropdown list. Your ISP
should provide the above information.
Click on BACK to return to the previous screen, on NEXT to continue, or on EXIT to exit
the wizard without saving.