Operation Manual

Cerberus ADSL Wi-Fi Lite

Windows NT

1. Click Start → Settings → Control Panel.

Double-click the Network icon.

2. Go to Protocols tab, select TCP/IP Protocol

and click Properties.

3. Go to IP Address tab, select Obtain an IP

address from DHCP server and click OK.

To make sure that network adapter properly obtained an IP address from router’s DHCP

server, click Start > Run and type cmd (Win 2000/XP) or command (Win 98/ME). In

command line type ipconfig /all and check that value of the IP Address is 10.0.0.x