Operation Manual

During track playback, the top of the screen shows keys that speed down,
stop or speed up track playback. The number to the right of the keys shows
the playback speed as a multiple of the driving speed.
Enable track storage
After you provide the file name and location, the information from the GPS
receiver will be saved. This is symbolized by a red square in the top left
corner of the screen.
Save route as a track
Converts the route calculated on the map and saves it as a GPS track. The
resulting file may be used as a standard GPS track from live recording.
3.2.2 Other GPS functions
Info
This dialog box shows 3 screens of information on the current GPS signal:
• satellite signal level – green bars show the relative
strength of the GPS signal of satellites used by the
antenna, yellow bars - of other detected satellites,
• your current position, speed, altitude, and direction,
• current raw GPS data dump in text form.
Enable/Disable/Detect
Depending on the current operation, this option will enable or
disable GPS. If the GPS port has not been detected
automatically, the operation can be repeated when this
option is called "Detect."
3.3 Settings menu
In the settings menu (select "Settings" from the main
menu) you can change many useful parameters of
AutoMapa to fit your preferences and requirements of your
device.
3.3.1 Interface - Settings
With interface settings you can change the appearance of
the screen in accordance with your preferences.
Map
In this box you can change the way the map is displayed
on the device screen.
Show route outlines – disables outlines of road sections on
the map, speeding up AutoMapa operation.
Thickness of route lines, etc. – specifies the relative line
weight of road sections on the map.
Small / large label fonts on the map - specifies the size of
fonts displayed on the map.
Hide local roads at the distance - specifies the scale for
hiding lower grade roads.