Operation Manual

3.1.1 Modify
This item offers the following options:
Load
Loads route points saved in an atm file. The file's location
should be selected on the device.
Save
Saves route points to an atm file. The file can be saved in
any location on the device.
Original
Calculates the original route.
Alternative
Other from START, END and VIA points, this option attempts
to use alternative roads throughout the entire course of this route.
Delete detours
Deletes temporary detour roadblocks created with the "Detour" function available from the Show position pop-up menu in
the navigation mode.
Recalculate
Recalculates the determined route; function available only after specifying the route points and refusal to calculate it. In
navigation mode, it is replaced with option "Calculate from the current position".
3.1.2 Blocked sections
The list of all blocked sections is displayed: blocked sections are marked with a red circle (traffic ban), and unblocked
sections – with a grey circle. This option enables the user to: view the blocked section on the map, unblock the section or
modify its beginning and/or expiry date, remove all blocked sections. Blocked sections can be saved to a file, loaded,
added from a file or imported from previous system versions.
3.2 GPS menu
GPS menu groups functions required for GPS device operation in the AutoMapa navigation system.
3.2.1 GPS tracks
A GPS track is information stored on the PC, obtained from the
GPS antenna, which can be saved to AutoMapa when the GPS
receiver is enabled. The track is saved to two files with user-
defined names and the following extensions: .gps and gps.bin.
Show track
Shows the saved track as a green line on the map. The map is
scaled to fit the complete track on the screen. The display can
also show several tracks simultaneously.
Hide track(s)
Hide track(s) displayed on the map.
Track playback
Shows the GPS position based on a previously saved track. The operation is similar to driving with the GPS receiver
enabled, also the navigation feature is available.