User Guide

43

Setup Menu
configure general camera settings.
T
t u.
2.
Using the
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to
o go to Setup Menu:
1. Press Menu but on to launch the Record/Playback Men
Use the
keys to switch the menu tab to Setup or
menu.
3. Use the
or keys to move through the me
selections.
To select
nu
4. an item, press the OK button or
key.
5. Change the submenu settings using the 4-way navigation
control.
6. Press the OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the OK button to apply changes.
Item Available Settings Description
Startup
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera is turned on.
Shutter On, Off
Enables or disables shutter sound when Shutter button is
pressed. Shutter sound is not available when recording videos
or voice clips.
Beep
volume
0-4 Adjusts volume.
Setting Power Save
The Power Save function allows you to set an idle time after
which the camera automatically sets to sleep mode to save
power. After a minute of being in sleep mode, the camera
eventually turns off power.
This function is not available in the following instances:
• Recording a video file
• Playing a slideshow/video file
• Using the USB connector