User Guide

31

ring
sure.
Mete
This sets the metering method for calculating the expo
Icon Item Description
Multi The entire area of the screen is measured, and the exposure is calculated.
Center
to the subject matter at the cent
Averages the light metered from the entire frame, but gives greater weight
er.
Spot
A very small portion of the center of the screen is measured, and the
exposure is calculated.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
et AF A
1. From the Record menu, select AF Area.
U
To s rea
2. se the
or keys
3. Press the OK button to save and apply changes.
The table below shows the available AF area settings.
to go through the selection.
Icon Item Description
Face Priority This feature auto detects faces and tracks continuously..
Wide The camera automatically selects focus area within the wide frame.
Center The focus area is fixed on the center.
Set i
he AF Lamp function allows you to record images even low
If AF Lamp is set to Auto, the AF lamp located in the front of
the camera, see "Front View" on page 7, emits an red light by
pressing tter button allowing the camera to fo
To e
1. F Record menu
2 U
t ng the AF Lamp
T
light conditions.
half
easily.
the Shu cus
s t AF Lamp
rom the
se the
, select AF Lamp.
.
or keys
3. Press the OK button to save and apply changes.
to go through the selection.