User Guide

3. Insert the batteries into the compartment with the terminal
facing inside the camera with correct orientation as shown.
4. Close and lock the
battery/memory
card compartment.
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by using SD, SDHC or SDXC
memory cards.
5. Unlock and open the Battery/memory card compartment at
the bottom of the camera.
6. Insert the SD/SDHC/SDXC card into the memory card slot
with the metallic part facing the back side of the camera.
7. Push the SD/SDHC/SDXC card into the memory slot until it
clicks into place.
8. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
• Windows 2000/XP are not support SDXC card (exFAT format). But in Windows
XP (Service Pack 2 or 3), you can download exFAT patch update to support
SDXC card.
• To use the SDXC card with Mac OS, the OS version should be 10.5 or higher.
13
