User Guide
Table Of Contents
- Preface
- Introduction
- Getting Started
- Using the LCD monitor
- Recording Images, Videos and Voices
- Taking Images
- Setting the Zoom Control
- Using Flash
- Setting the Focus Mode
- Using the Function Menu
- Using the Record Menu
- Record Menu
- Setting the Scene Mode
- Using Intelligent Scene
- Using Kids Mode
- Using Sports Mode
- Using Party Mode
- Using Soft Skin mode
- Using Food Mode
- Using Foliage Mode
- Using LOMO Mode
- Using Auction Mode
- Using Blink Detection Mode
- Using Pre-composition Mode
- Using Love Portrait
- Using Fisheye Lens Mode
- Using Aperture Priority Mode
- Using Voices Recording
- Recording Videos
- Playback
- Using the Setup Menu
- Making Connections
- Appendix
- Troubleshooting
- Specifications
76
White Balance
This sets the white balance for a variety of lighting conditions
and permits images to be captured that approach the
conditions that are seen by the human eye.
• As you move through the selection, you can see the
preview on the LCD monitor synchronously.
Icon Item Description
Auto White
Balance
The camera automatically adjusts the white balance.
Daylight Ideally used for bright sunny conditions.
Cloudy Ideally used for cloudy conditions.
Tungsten
Ideally used for indoor images with tungsten or halogen lighting without a
flash.
Fluorescent 1 Ideally used for indoor images with bluish fluorescent lighting conditions.
Fluorescent 2 Ideally used for indoor images with reddish fluorescent lighting conditions.
Custom
Used when light source cannot be specified.
Press the Shutter button for the camera to automatically adjust the
appropriate white balance setting according to the environment.
77
ISO
This sets the sensitivity for capturing images. When the
sensitivity is raised (and the ISO figure is increased),
photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
• Use a higher ISO setting in dim conditions and a lower
ISO setting in brighter conditions.
If the Stabilizer is enabled, ISO is automatically set to Auto and cannot be adjusted.
To adjust ISO disable Stabilizer first.
23