Operating Manual

59

5. The PC starts to detect the connection while the
LCD monitor appears Connecting…
6. Connection established after PC MODE appeared
on the LCD monitor
7. Access the files in the camera by your PC.
• The camera’s internal memory and memory card would display as removable drives
in PC.
• After the connection, no image is displayed on the LCD monitor.
• When this camera is connected to your PC, two removable drives will display.
Please click AP link (Magix) in the second drive, and then Setup window will dispaly
(an Internet connection is required). After installation, you can import / edit your
photos, movies and music. Please note that AP link (Magix) is the trial version and
will be used permanently after registration.
Connecting the Camera to a Printer
You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that the
printer is turned on, there is paper in the
printer, and there are no printer error
messages.
2. Connect one end of the USB cable to the
printer while the other end to USB
terminal on the camera.
3. The USB mode menu appears on the
screen. Select Printer by using the
or
key and press the OK button.
4. Enter the print mode and print the
selected images.
For details on the "Setting the Print Mode
Menu".