Operating Manual

Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD
brightness to conserve battery power. When the camera is idle
ns. Press any button to resume to
55

re
vi
for 20 seconds, the LCD darke
normal brightness.
• The camera is id and enters LCD Save mode when no
buttons a pressed. LCD Save, though enabled, does not
le
function during deo playback, slideshow and video
recording.
Sett
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching
es. Your camera uses a 24-hour time format.
value. By holding down the
ing Date & Time
date stamps on captured imag
1. Press the navigation controls to adjust date and time
or keys, the numeric
pply changes.
values changes continuously.
2. Press the OK button to a
etting Language
ges are to be displayed o nitor.
1. Use the navigation control to scroll through the list and
ct e.
2. Press the m and apply settings.
S
Specify in which language menus and messa n the LCD mo
sele the desired languag
OK button to confir
Se
oth
ode.
vailable settings are: On, Detailed, Off.
shots
w tions:
• Switch from Playback to Record mode
• After shooting
• Close the menu and back to preview
tting Display Mode
This function controls the icon display on LCD monitor for b
Record mode and Playback m
A
If set Display Mode to Off, the mode icon and remaining
ill display for 2 seconds in following situa
• Power on the camera