Operating Manual

54

the Setup Menu
u button to launch the Record/Playback Menu.
Using
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
1. Press Men
2. Use the
or keys to switch the menu tab to Setup
3.
menu.
Use the
or keys to move through the menu
s
4. T
elections.
o select an item, press the OK button or
key.
5. C ation
control.
. Press the OK button to save and apply settings.
hange the submenu settings using the 4-way navig
6
Se
U ds produced by the camera.
1.
3. y changes.
tting Sounds
se the Sound menu functions to control the soun
From the Setup menu, select Sounds.
2. Adjusts sound settings.
Press the OK button to appl
Item Available Settings Description
Startup
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera is turned on.
Shutter On, Off
Enables or disables shutter sound when Shutter button is
pressed. Shutter sound is not available when recording videos
or voice clips.
Beep
volume
0-4 Adjusts volume.
Sett e
The P
which the camera automatically sets to sleep
power. After a minute of being in sleep mode, the camera
ev
This fun
• R
• Pl ile
• Using the USB connector
ing Pow r Save
ower Save function allows you to set an idle time after
mode to save
entually turns off power.
c not available in the following instances:
ecording a video or audio file
tion is
aying a slideshow/video/audio f