Operating Manual

53

printing information on
can select the images to be printed and how many prints to make with the DPOF
insert the memory card to the card compatible printer. When the printer starts
printing, it will read the embe ory card and print the specified images.
T :
1. e MENU button to launch the Playback menu.
lect a single image to mark.
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed
your memory card. You
menu in the camera and
dded information on the mem
o set DPOF
Press th
2. Select DPOF. The submenu appears. Available settings
are as follows:
• Single. Se
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default
settings.
To se
1. S
t DPOF on a single image/all images:
elect Single or All on the DPOF submenu.
2. For single image, use the
or keys to scroll
select an image to mark for printing.
and
3. Specify the number of copies. Use the
or to
increase/decrease number.
4. Press the Fn/Delete button to toggle between turning
on/off the date stamp.
5. Press the OK button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set R
1. U e
adial blur for an image:
the s or keys to specify the level of blurs. The
adjusting result on preview synchronously while selecting
the level.
2. Press the OK button to proceed save options.
3. Available settings are as follow:
• Overwrite. Save and replace the old file with a new
one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Radial blur.