Operating Manual

To protect/unprotect multiple files:
1. Select Multi in the Protect submenu, the images are
displayed in thumbnail view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired file is highlighted, press the OK button to
mark/unmark the file clip for protection.
4. Repeat step 3 until all desired files to protect are marked.
5. Press the MENU button. A confirmation selection appears.
6. Select Yes.
7. Press the OK button to lock files and go back to Playback
mode.
To protect all files:
1. Select Lock all in the Protect submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to lock all files.
To unlock all files:
1. Select Unlock all in the Protect submenu. A confirmation
message appears.
2. Select Yes.
3. Press the OK button to unlock all protected files.
Red-eye Correction
The Red-eye Correction function is used to reduce red eye in captured images. This function is only
available for still images. Red-eye correction can be applied to an image several times, but the quality may
gradually deteriorate.
To activate Red-eye Correction:
1. Press the Playback button on the camera.
2. Press the
or keys to scroll and select an image.
3. Press the MENU button to launch the Playback menu.
4. Select Red-eye Correction.
5. Select Start.
6. Press the OK button to start correction.
7. After completing Red-eye correction, a menu selection
appears. Select whether to:
• Overwrite. Save and replace old file with a new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel
red-eye correction.
8. Press the OK button to save/cancel changes.
48
