Operating Manual

Setting the Digital Zoom
This feature controls the digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first.
When the zoom scale exceeds 5X, the camera uses digital
zoom.
To set Digital Zoom
1. From the Record menu, select Digital Zoom.
2. Use the
or keys to go through the selection.
3. Press the OK button to save and apply changes.
The table below shows the available Digital Zoom settings.
Icon Item Description
Intelligent Zoom
Enlarges the image digitally with almost no distortion. This feature is
available for still images only.
Standard Zoom
Enlarges all image sizes up to a maximum of 5x in preview, but the image
quality deteriorates.
Off Uses the optical zoom only.
• Digital Zoom is not available in Face tracking on, Movie, and Voice Recording
modes.
• The maximum Intellect zoom scale varies depending on the image type and
resolution.
Setting the Date Stamp
The date of recording can be printed directly on the still
images. This function must be activated before the image is
captured. Once date and time are stamped on an image, they
can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for still images only.
• May slow down AEB/ Burst mode when Date Stamp is
enabled in AEB/ Burst mode.
• In vertical or rotated images, the date and time on your
images still appear horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the
or keys to go through the selection.
3. Press the OK button to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured image
right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
2. Use the
or keys to go through the selection.
3. Press the OK button to save and apply changes.
39
