Operating Manual
Table Of Contents
- Read this first!
- Contents
- Unpacking
- General Guide
- Monitor Screen Contents
- Quick Start Basics
- What is a digital camera?
- What you can do with your camera
- First, charge the battery prior to use.
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Turning the Camera On and Off
- Holding the Camera Correctly
- To shoot a snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Snapshot Tutorial
- Recording Movie Images and Audio
- Using Scene Mode
- Advanced Settings
- Using On-screen Menus
- REC Mode Settings (REC)
- Selecting a Focus Mode (Focus)
- Changing the Focus Frame Shape (Focus Frame)
- Using Burst
- Reducing the Effects of Camera and Subject Movement (Stabilizer)
- Specifying the Auto Focus Area (AF Area)
- Assigning Functions to the [] and [] Keys (L/R Key)
- Displaying the On-screen Grid (Grid)
- Using Icon Help (Icon Help)
- Configuring Power On Default Settings (Memory)
- Image Quality Settings (Quality)
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Using the PLAY Panel
- Playing a Slideshow on the Camera (Slideshow)
- Performing Playback without Disturbing Others (Silent Mode)
- Rotating an Image (Rotate)
- Selecting Images for Printing (DPOF)
- Protecting a File Against Deletion (Protect)
- Resizing a Snapshot (Resize)
- Cropping a Snapshot (Trimming)
- Adding Audio to a Snapshot (Voice Memo)
- Copying Files (Copy)
- Printing
- Using the Camera with a Computer
- Other Settings (Set Up)
- Configuring Camera Sound Settings (Sounds)
- Configuring a Startup Image
- Specifying the File Name Serial Number Generation Rule (File Numbering)
- Configuring World Time Settings (World Time)
- Time Stamping Snapshots (Date Stamp)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Format
- Specifying the Display Language (Language)
- Configuring Sleep State Settings (LCD Save)
- Configuring Auto Power Settings (Power Saving)
- Configuring [] and [] Settings (REC/PLAY)
- Disabling File Deletion ( Disable)
- Configuring USB Protocol Settings (USB)
- Selecting the Screen Aspect Ratio and Video Output System (TV Out)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Appendix
63
1. Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the
USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3. Press [ ] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [ ] (REC) will not turn on the camera while the
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 93).
4. Now you can display images and play back movies as you normally do.
Viewing Snapshots and Movies on a TV Screen
Yellow
AV cable (bundled)
[USB/AV] port
White
Making sure that the mark on the AV cable connector is towards the
lens side, connect the cable to the camera.
VIDEO IN jack (yellow)
AUDIO IN jacks (white)
TV
AudioVideo