Operating Manual
Table Of Contents
- Read this first!
- Contents
- Unpacking
- General Guide
- Monitor Screen Contents
- Quick Start Basics
- What is a digital camera?
- What you can do with your camera
- First, charge the battery prior to use.
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Turning the Camera On and Off
- Holding the Camera Correctly
- To shoot a snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Snapshot Tutorial
- Recording Movie Images and Audio
- Using Scene Mode
- Advanced Settings
- Using On-screen Menus
- REC Mode Settings (REC)
- Selecting a Focus Mode (Focus)
- Changing the Focus Frame Shape (Focus Frame)
- Using Burst
- Reducing the Effects of Camera and Subject Movement (Stabilizer)
- Specifying the Auto Focus Area (AF Area)
- Assigning Functions to the [] and [] Keys (L/R Key)
- Displaying the On-screen Grid (Grid)
- Using Icon Help (Icon Help)
- Configuring Power On Default Settings (Memory)
- Image Quality Settings (Quality)
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Using the PLAY Panel
- Playing a Slideshow on the Camera (Slideshow)
- Performing Playback without Disturbing Others (Silent Mode)
- Rotating an Image (Rotate)
- Selecting Images for Printing (DPOF)
- Protecting a File Against Deletion (Protect)
- Resizing a Snapshot (Resize)
- Cropping a Snapshot (Trimming)
- Adding Audio to a Snapshot (Voice Memo)
- Copying Files (Copy)
- Printing
- Using the Camera with a Computer
- Other Settings (Set Up)
- Configuring Camera Sound Settings (Sounds)
- Configuring a Startup Image
- Specifying the File Name Serial Number Generation Rule (File Numbering)
- Configuring World Time Settings (World Time)
- Time Stamping Snapshots (Date Stamp)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Format
- Specifying the Display Language (Language)
- Configuring Sleep State Settings (LCD Save)
- Configuring Auto Power Settings (Power Saving)
- Configuring [] and [] Settings (REC/PLAY)
- Disabling File Deletion ( Disable)
- Configuring USB Protocol Settings (USB)
- Selecting the Screen Aspect Ratio and Video Output System (TV Out)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Appendix
48
4. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a
different scene.
• To select a different Scene Mode scene, repeat the above procedure from
step 1.
5. Press the shutter button (if you are shooting a snapshot) or [ ]
(Movie) (if you are shooting a movie).
• Using Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene selection screen, and then slide the zoom
controller in either direction.
• To return to the scene menu, slide the zoom controller
again.
• To scroll between scenes, use [ ] and [ ].
• To configure the camera with the settings for the currently
selected scene, press [SET].
• Scene Mode Precautions
• Some Scene Mode scenes cannot be used while recording a movie.
• The Voice REC scene cannot be used while shooting a snapshot or recording a
movie.
• Some scenes like Night Scene and Fireworks results in a slow shutter speed
setting. Since a slow shutter speed increases the chance of digital noise in the
image, the camera automatically performs a digital noise reduction process when
either of these scenes is selected. This means that it will take a bit longer for the
image to be saved which is indicated by the back lamp flashing green. Do not
perform any key operation during that time. Also, it is a good idea to use a tripod to
avoid image blur due to camera movement when shooting at slow shutter speeds.
• High Sensitivity
– The high sensitivity setting is disabled whenever the camera’s flash fires.
– High sensitivity may not produce the desired results in very dark conditions.
– When shooting with slow shutter speeds, use a tripod to protect against blurring
due to camera movement.
– Under certain lighting conditions, the camera will perform an automatic noise
filtering operation to reduce digital noise in the image. This operation causes the
camera to take longer than normal to save the image and be ready for the next
shot.
• Scene Mode scene images were not shot using this camera.
• Images shot using a Scene Mode scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are made after you select a Scene Mode
scene. Note, however, that the Scene Mode settings revert to their defaults when
you select another Scene Mode scene or turn off the camera.