Operating Manual
Table Of Contents
- Read this first!
- Contents
- Unpacking
- General Guide
- Monitor Screen Contents
- Quick Start Basics
- What is a digital camera?
- What you can do with your camera
- First, charge the battery prior to use.
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Turning the Camera On and Off
- Holding the Camera Correctly
- To shoot a snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Snapshot Tutorial
- Recording Movie Images and Audio
- Using Scene Mode
- Advanced Settings
- Using On-screen Menus
- REC Mode Settings (REC)
- Selecting a Focus Mode (Focus)
- Changing the Focus Frame Shape (Focus Frame)
- Using Burst
- Reducing the Effects of Camera and Subject Movement (Stabilizer)
- Specifying the Auto Focus Area (AF Area)
- Assigning Functions to the [] and [] Keys (L/R Key)
- Displaying the On-screen Grid (Grid)
- Using Icon Help (Icon Help)
- Configuring Power On Default Settings (Memory)
- Image Quality Settings (Quality)
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Using the PLAY Panel
- Playing a Slideshow on the Camera (Slideshow)
- Performing Playback without Disturbing Others (Silent Mode)
- Rotating an Image (Rotate)
- Selecting Images for Printing (DPOF)
- Protecting a File Against Deletion (Protect)
- Resizing a Snapshot (Resize)
- Cropping a Snapshot (Trimming)
- Adding Audio to a Snapshot (Voice Memo)
- Copying Files (Copy)
- Printing
- Using the Camera with a Computer
- Other Settings (Set Up)
- Configuring Camera Sound Settings (Sounds)
- Configuring a Startup Image
- Specifying the File Name Serial Number Generation Rule (File Numbering)
- Configuring World Time Settings (World Time)
- Time Stamping Snapshots (Date Stamp)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Format
- Specifying the Display Language (Language)
- Configuring Sleep State Settings (LCD Save)
- Configuring Auto Power Settings (Power Saving)
- Configuring [] and [] Settings (REC/PLAY)
- Disabling File Deletion ( Disable)
- Configuring USB Protocol Settings (USB)
- Selecting the Screen Aspect Ratio and Video Output System (TV Out)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Appendix
13
You can use either of the two following methods to charge the camera’s battery.
• USB adapter
• USB connection to a computer
• To charge with the USB adapter
1. Turn off the camera.
Check to make sure that the camera’s monitor screen is
blank. If it isn’t, press [ON/OFF] (Power) to turn off the
camera.
2. Connect the camera with the USB cable as shown.
3. Connect the other end with the USB
adapter and plug it into a power outlet
or with the USB port of PC directly for
charging.
Back Lamp Operation
4. After charging is complete, disconnect the USB cable from the camera
and then unplug the power cord from the power outlet.
Charge the Battery
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
USB adaptor problem, or battery
problem (page 101)
Off Charging complete
[ON/OFF] (Power)
Back lamp