User's Manual

CARD FU LL
MEMORY FULL
CARD LO CKED
(ICON BLINKING)
LOCK
NO IMAGE
FILE ERROR
MEMORY ERROR
CARD ER ROR
LOW BATTERY !
(ICON BLINKING)
There is insufficient card memory capacity
for storing an image.
There is insufficient internal memory
capacity
for storing an image.
The memory card is under protection.
The Image can not be deleted under
protection .
There is no image stored in the memory
card or built-in flash memory.
File fo rmat error.
Memory is damaged or fails.
Card is damaged or fails.
Battery power is drained.
Messages Causes
The environment is too dark in Flash off or
"Night Scene''.
The environment is too dark in Flash off or
"Night Scene''.
LOW LIGH T!
HAND SHAKE ICON
NO PAPER!
Paper has run out.
Camera Hangs
Error Message Table
Delete the stored image(s) in the memory card or
insert a new memory card.
Delete the stored image(s) in the flash memory.
Set the ca rd pr ot ec tion sw itch at non -prot ec tion
position.
Unlock the protected image.
Insert a new memory card or format the built-in
flash memory.
Format the memory card or built-in flash memory.
Insert a new memory card.
Insert a new battery.
Set the flash mode at Auto Flash or Fill-in Flash.
Avoid shake.Set the flash mode at Auto Flash or Fill -in
Flash.
Please pu t mor e pap er in the pape r tray of th e Pr inter.
1. Remove the battery.2. Reload the battery.
3. Switch on the camera.
Solutions
13.0 Appendix