User manual
Table Of Contents
- Read this first!
- Contents
- Unpacking
- General Guide
- Monitor Screen Contents
- Quick Start Basics
- What is a digital camera?
- What you can do with your camera
- First, charge the battery prior to use.
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Turning the Camera On and Off
- Holding the Camera Correctly
- To shoot a snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Using the mode dial
- Using the Control Panel
- Optimizing Image Brightness (D-Lighting)
- Changing the Image Size (Size)
- Using Flash (Flash)
- Using the Self-timer (Self-timer)
- Using the Soft Skin (Soft Skin)
- Shooting without Disturbing Others (Silent Mode)
- Shooting with Zoom
- Recording Movie Images and Audio
- Using Scene Mode
- Advanced Settings
- Using On-screen Menus
- REC Mode Settings (REC)
- Selecting a Focus Mode (Focus)
- Changing the Focus Frame Shape (Focus Frame)
- Specifying the Auto Focus Area (AF Area)
- Using the Auto Focus Lamp (AF Lamp)
- Using Face Tracking
- Using Burst
- Reducing the Effects of Camera and Subject Movement (Stabilizer)
- Assigning Functions to the [] and [] Keys (L/R Key)
- Displaying the On-screen Grid (Grid)
- Using Icon Help (Icon Help)
- Configuring Power On TDefault Settings (Memory)
- Image Quality Settings (Quality)
- Snapshot Tutorial
- Other Settings (Set Up)
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Using the PLAY Panel
- Playing a Slideshow on the Camera (Slideshow)
- Performing Playback without Disturbing Others (Silent Mode)
- Rotating an Image (Rotate)
- Selecting Images for Printing (DPOF)
- Protecting a File Against Deletion (Protect)
- Resizing a Snapshot (Resize)
- Cropping a Snapshot (Trimming)
- Adding Audio to a Snapshot (Voice Memo)
- Copying Files (Copy)
- Printing
- Using the Camera with a Computer
- Things you can do using a computer...
- Files and Folders
- Configuring a Startup Image
- Specifying the File Name Serial Number Generation Rule (File Numbering)
- Configuring World Time Settings (World Time)
- Time Stamping Snapshots (Date Stamp)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Format
- Specifying the Display Language (Language)
- Configuring Sleep State Settings (LCD Save)
- Configuring Auto Power Settings (Power Saving)
- Configuring [] and [] Settings (REC/PLAY)
- Disabling File Deletion ( Disable)
- Selecting the Screen Aspect Ratio and Video Output System (TV Out)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Appendix
108
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when
remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 18). Do not remove the battery from the camera
for at least 48 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 48 hours, it could mean that the camera’s setting
memory is defective.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Problem Possible Cause and Recommended Action