Instruction Manual

5
§ The MicroSprayer® Aerosolizer can be safely cleaned with hot water or any organic
solvent, autoclave or ultrasonic cleaner, and most, but not all, disinfectants. It is meant to be
sterilized and re-used.
SYRINGES FOR USE WITH THE MICROSPRAYER® AEROSOLIZER - MODEL IA-1B
The MicroSprayer® Aerosolizer Model IA-1B can be operated either with a commercial gas-tight 0.5 ml
precision glass syringe (sold separately) or 1 ml polycarbonate syringe (provided). NOTE: These syringes
are intended to be filled with ONE DOSE at a time. The plunger must be pushed quickly and with force to
produce a uniform aerosol and must be pushed with the same force until the plunger fully empties the
syringe.
0.5 ml gas-tight precision glass syringe
• Operates any MicroSprayer® Aerosolizer Model IA-1B
• Maximum capacity: 500 microliters
• Provides optimal aerosol delivery
• Precision glass safety syringe
• Sterilizable with standard methods and organic solvents, including acetone
• Commercial gas-tight syringe with Teflon® plunger tip
• Do not remove plunger all the way when cleaning, per manufacturer’s instructions
1 ml polycarbonate syringe
• Operates any MicroSprayer® Aerosolizer Model IA-1B
• Maximum capacity: 1 ml
• May be cleaned with bleach or ethanol
• Commercial gas-tight syringe with Teflon® plunger tip
• For precise aerosol doses up to 1 ml