HDMI to USB 3.0 1080p GRABBER HDMI to U3 Capture User manual (v.
A. Introduction ---------------------------------------------------------------------------------- 03 B. Features --------------------------------------------------------------------------------------- 03 C. Inside the box -------------------------------------------------------------------------------- 03 D. Specifications -------------------------------------------------------------------------------- 04 E.
A. Introduction Pengo 1080p HDMI to USB-C Grabber is designed to capture 1080p video allowing the user to plug-in various HDMI output devices（such as PS4, XBOX, Switch, camera, etc.）data uplink to 1920 x 1080p at 60Hz to the computer through the USB terminal. Streaming media made easy, capture every sound and movement. It will not affect your computer’s performance, while maintaining a resolution up to 1080p at 60 frames per second. B. C. Features • Supports HDMI 1.
D. Specifications DESCRIPTION 1080p HDMI to USB-C Grabber RESOLUTION 1 x HDMI Type A HDMI 1.4b standard up to 1080p at 60fps 1 x USB type-C (USB 3.0 ) UVC video and audio 640x480p 60Hz, 1280x720p 60Hz, 1920x1080p 60Hz VIDEO SAMPLING 4:4:4 format OUTPUT COLOR SPACE YUY2, RGB HDMI AUDIO 16-bit PCM encoded audio at 48kHz sampling rates SYSTEM REQUIREMENTS CPU: i5 Dual Core 2.8GHz or higher RAM: 4GB or higher OS: Windows (8 and above), Mac OSX (10.
F. Installation 1. 2. G. Connect Pengo HDMI to USB 3.0 1080p Grabber into the computer via USB 3.0 Port. Plug in your devices (ie: PS4 Pro, Xbox One X, Camcorder) with an HDMI Cable into the HDMI input port. Operating Instructions (Windows with PotPlayer) 1. PotPlayer 1.
1.2 Download PotPlayer : https://potplayer.daum.net/ (install base on your OS version) Open PotPlayer (different versions will have different interface) 1.
1.4 Select Device I. Under Menu > Open -> Device Settings II. Under Webcam -> Video capture device, under Device select -> [ USB Video Device] III. Audio capture device -> under Device select -> [ WASAPI – Mic (USB Audio Device) ] IV. Press [ Open device], You’ll be able to see your video and audio 1.5 Video Recording I. Go to the Menu -> Video -> Video Recording -> Record Video II. Select your storage location III.
H. Operating Instructions (Mac OS with VLC or QuickTime) **Newer version of VLC might not work 1. VLC 1.1 Download VLC at https://www.videolan.org/index.html 1.2 Open VLC 1.3 Go to File -> Open Capture Device 1.4 Under Capture, check the video and audio box and select [HDMI to U3 Capture] and press Open 2. QuickTime 2.1 Open QuickTime 2.2 Go to File -> New Movie Recording 2.
Note: • • • • It is recommended to use USB 3.0 over USB 2.0 port. Different version will have slightly different interface. Make sure your source does not have HDCP, we do not support HDCP. Make sure your device is not 1080i. We do not support 1080i. We support 1080p. • • • Please contact us if you have any issues. Please register your Pengo product at: www.pengohome.
