HDMI to USB-C 4K GRABBER User manual (v.
A. Introduction ........................................................................................................... 1 B. Features ................................................................................................................. 1 C. Inside the box ........................................................................................................ 1 D. Specifications .........................................................................................................
A. Introduction Pengo HDMI to USB-C 4K Grabber is designed to capture 4K UHD video, allowing the user to plug-in various 4K HDMI output devices (such as PS4, XBOX, Switch, camera, etc.) and uplink 4K UHD 30Hz data to the computer through the USB terminal. Streaming media made easy, capture every sound and movement. It will not affect your computer’s performance, while maintaining a resolution up to 4K at 30 fps. B. Features Supports HDMI 2.
D. Specifications MODEL NAME HDMI to USB-C 4K Grabber INPUT INTERFACE 1 x HDMI 2.
E. System requirements CPU: i5 Dual Core 2.8GHz or higher RAM: 4GB or higher OS: Microsoft Windows 8.1/10 MacOS (10.13 and above) F. Installation 1. Connect Pengo HDMI to USB-C 4K Grabber into the computer via USB 3.0 Port. 2. Plug in your devices (ie: PS4 Pro, Xbox One X, Camcorder) with an HDMI Cable into the HDMI input port. G. Operating Instructions (Windows with OBS) 1.
2. Download OBS Studio: https://obsproject.com/ (OBS-Studio-25.0.8-Full-Installer-x64.exe) 3. Open OBS Studio. (version 25.0.8) 1. Video Setting 1.
1.2 Select “Pengo 4K Grabber” as your device 1.
2. Audio Setting 1.1 Click on the audio setting icon as displayed below 1.2 Select “Properties” 1.
1.4 Under the Audio Setting Icon: Select “Advanced Audio properties” 1.5 Under Advanced Audio Properties: Adjust your audio source to suggested Microphone and speaker need to change the setting into preferences ( Monitor and Output) 1.
H. Operating Instructions (Mac OS with OBS) 1. Video Setting 1.1 Under Sources, click on the “+” icon and select “Video Capture Device” 1.
1.3 Under Properties: Select “Pengo 4K Grabber” in Device Do not click “Use Preset” and customize the configuration.
2. Audio Setting 1.1 Click on the Audio Setting Icon as indicated below 1.2 Select “Properties” 1.
1.4 Click on the Audio Setting Icon and select “Advanced Audio Properties” 1.5 Under Advanced Audio Properties: Select “Monitor and Output” 1.6 Setting Completed Note: USB 3.0 is recommended to be connected. Different versions will have slightly different interface. Make sure your source does not have HDCP, we do not support HDCP. Please contact us if you have any issue. Please register your Pengo product at: www.pengohome.
