User's Manual

Technical specifi cations Technical support
The supported platforms for Penclic Mouse™ are all
operating systems that support HID 1.1. These include
Windows XP or later, Mac OSX version 10.1 or later
and most Linux/BSD fl avors. No extra software/driver
installation is needed.
· Operates on almost any surface without any
pad or tablet.
· Implements a 5-button and scroll wheel.
·
· Charging via USB.
· LR 03/AAA/1.5V Alkaline None rechargeable battery
can be used. NOTE: do not recharge.
· Energy saving mode starts after 10 min, press a
button to start.
· Wireless reach, minimum 5 metres.
· Dpi setting 800-1200-1600-2400.
NOTE: the dpi setting can be changed by holding in the
left and right button at the same time for 3 sec, the
cursor will move faster for each setting. It will rotate
around from 800-2400 and then go back to low 800.
Once the power is shut of the dpi setting will return to
its default setting, 1200 dpi.
Measurements:
Height: 140 mm, Base: 44.1 x 20 mm.
Weight: 41 g
Should you require additional technical support with
your Penclic Mouse™ , please use our Web site for further
information or contact our support group through e-mail.
Call Technical Support during business hours, central
European time plus one hour.
Contact:
0046 8 544 98 995
email: [e-mail]
· AAA 1.2V NiMH Recharging battery (Everyday use last
approximately 3 months before charging is needed).
4
QG-Wireless.indd 4-5
5
2011-06-27 21.27
QG-Wireless.indd 50-5 2011-06-27 21.27