3M WS LiteCom PRO III - Data Sheet

DS17026 rev. a 3M™ PELTOR™ Global Marketing Communication, Värnamo
3M Personal Safety Division
3M Svenska AB, Box 2341
SE-331 02 Värnamo
Sweden
Internet: www.3M.com/PELTOR
Email:[e-mail]
Phone: [phone]
Warranty:
The warranty does not cover any damage caused by neglected maintenance or
careless handling.
For more information on maintenance, please see the user instruction.
For complete warranty condition, contact your dealer or local 3M oce
Important Notice
3M does not accept liability of any kind, be it direct or consequential (including,
but not limited to, loss of prots, business and/or goodwill) arising from reliance
upon any information herein provided by 3M.
The user is responsible for determining the suitability of the products for their
intended use. Nothing in this statement will be deemed to exclude or restrict
3M’s liability for death or personal injury arising from its negligence.
3M acknowledges the respective Trademark Owners´ rights in this literature.
Please recycle. Printed in Sweden.
© 3M 2018. All rights reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by 3M Company is under license.
3M and WS are trademarks of 3M Company, used
under license in Canada. PELTOR is a trademark of 3M
Company, used under license in Canada.
Technical data specications
The 3M
™
PELTOR
™
WS
™
LiteCom Pro III GB High Visibility Headset
operates on radio communication frequencies that may be subject to
end-user licensing by local government agencies. The user is responsible
for contacting the local government agency and obtaining any necessary
licences prior to using the two-way communication radio.
Technical data specications
Model Weight (with ACK081)
Headband: 490g
Helmet attachment: 512 g
Neckband: 475 g
Built-in Two-way Radio
Frequency range: PMR 403-470 MH
Operation mode: Simplex
Channels: 16 pre-programmed channels (Analog PMR)
16 pre-programmed channels (Digital PMR)
Channel separation: 12,5 kHz
Modulation: Analog: FM
Digital: TDMA
Microphone type: Dynamic (MT73)
Receiver sensibility: Typical -120 dBm
Selective squelch: Programmable (supports CTCSS and DCS)
Output power: 200 / 20 / 10 mW ERP
Range: Outdoors up to 2 km depending on conditions
Operating temperature: -20°C to +50°C
Power
Li-Ion battery: ACK081, included in delivery
Charging time: approx. 4 hours
Capacity: 3,7 V, 1800 mA, 6,7 Wh
Operating time: up to 11 hours* (90 stby / 5 tx / 5 rx)
*can be increased up to 17 hours with the power save feature
Storage
Recommended storage
conditions:
-20º C - +55º C, <90% humidity
Recommended max. shelf life: Headset: 3 years
Battery: 1 year
User limitation: Never modify or alter this product
In the box
1 × 3M™ PELTOR™ WS™ LiteCom Pro III GB Headset.
1 x Battery (ACK081)
1 x Power supply FR08
1 x Cable AL2AI (for ACK081)
1 x Hygiene kit HY83
1 x User instruction
Laboratory Attenuation
MT73H7A4D10EU GB EN352-1:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
19.3 25.0 34.8 37.4 36.1 40.4 36.4
33
Standard deviation (dB)
2.5 1.9 2.6 3.5 3.7 2.4 4.0
Assumed Protection Value (dB)
16.8 23.1 32.2 33.9 32.4 38.0 32.4
H=34 dB M=31 dB L=25 dB
MT73H7B4D10EU GB EN352-1:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
17.7 23.9 32.5 36.2 35.6 39.5 37.1
32
Standard deviation (dB)
2.8 3.1 3.9 3.1 2.5 2.9 2.3
Assumed Protection Value (dB)
14.9 20.8 28.6 33.1 33.1 36.6 34.8
H=35 dB M=30 dB L=22 dB
MT73H7P3E4D10EU GB EN352-3:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
18.1 23.2 32.0 36.4 34.2 40.2 34.5
32
Standard deviation (dB)
3.3 1.8 3.4 2.7 1.9 2.5 4.6
Assumed Protection Value (dB)
14.8 21.4 28.6 33.7 32.3 37.7 29.9
H=33 dB M=30 dB L=23 dB
WARNING! 3M strongly recommends individual t testing of hearing
protectors. If the NRR or SNR is used to estimate typical workplace
protection, 3M recommends that the noise reduction value be reduced by
50% or in accordance with applicable regulations.
3M PSD products are occupational use only.