3M WS LiteCom PRO III Brochure

MP170019 rev. a 3M™ PELTOR™ Global Marketing Communication, Värnamo, Sweden
3M Personal Safety Division
3M United Kingdom PLC
3M Centre, Cain Road
Bracknell, Berkshire RGH12 8HT
Tel: [phone]
3M Ireland
The Iveagh Building, The Park
Carrickmines, Dublin 18
Tel: [phone]
Laboratory Attenuation
Warranty:
The warranty does not cover any damage caused by neglected maintenance
or careless handling.
For more information on maintenance, please see the user instruction.
For complete warranty condition, contact your dealer or local 3M oce
Important Notice
3M does not accept liability of any kind, be it direct or consequential
(including, but not limited to, loss of prots, business and/or goodwill)
arising from reliance upon any information herein provided by 3M.
The user is responsible for determining the suitability of the products for
their intended use. Nothing in this statement will be deemed to exclude or
restrict 3M’s liability for death or personal injury arising from its negligence.
3M acknowledges the respective Trademark Owners´ rights in this literature.
Standards and Approvals
Hereby, 3M Svenska AB declares that the product is in compliance
with appropriate directives or regulations to fulll the requirements
for the CE marking.
The full text of the EU declaration of conformity is available at the
following internet address: www.3M.com/PELTOR/DOC. A copy of
the declaration of conformity and additional information required in
the directives or regulations can also be obtained by contacting 3M
in the country of purchase.
Technical data specications
User limitation: Never modify or alter this product
Please recycle. Printed in Sweden.
© 3M 2018. All rights reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by 3M Company is under license.
3M and WS are trademarks of 3M Company, used
under license in Canada. PELTOR is a trademark of 3M
Company, used under license in Canada.
Technical data specications
Model Weight (with ACK081)
Headband: 490g
Helmet attachment: 512 g
Neckband: 475 g
Built-in Two-way Radio
Frequency range: PMR 403-470 MHz
Operation mode: Simplex
Channels: 16 pre-programmed channels (Analog PMR)
16 pre-programmed channels (Digital PMR)
Channel separation: 12,5 kHz
Modulation: Analog: FM
Digital: TDMA
Microphone type: Dynamic (MT73)
Receiver sensitivity: Typical -120 dBm
Selective squelch: Programmable (supports CTCSS and DCS)
Output power: 200 / 20 / 10 mW ERP
Range: Outdoors up to 2 km depending on conditions
Operating temperature: -20°C to +50°C
Power
Li-Ion battery: ACK081, included in delivery
Charging time: approx. 4 hours
Capacity: 3,7 V, 1800 mA, 6,7 Wh
Operating time: up to 11 hours* (90 stby / 5 tx / 5 rx)
*up to 17 hours with the power save feature activated
Storage
Recommended storage
conditions:
-20º C - +55º C, <90% humidity
Recommended max. shelf life: Headset: 3 years
Battery: 1 year
The 3M
™
PELTOR
™
WS
™
LiteCom Pro III GB Headset operates on radio
communication frequencies that may be subject to end-user licensing
by local government agencies. The user is responsible for contacting the
local government agency and obtaining any necessary licences prior to
using the two-way communication radio.
WARNING! 3M strongly recommends individual t testing of hearing
protectors. If the NRR or SNR is used to estimate typical workplace
protection, 3M recommends that the noise reduction value be reduced by
50% or in accordance with applicable regulations.
3M PSD products are occupational use only.
In the box
1 × 3M™ PELTOR™ WS™ LiteCom Pro III GB Headset.
1 x Battery (ACK081)
1 x Power supply FR08
1 x Cable AL2AI (for ACK081)
1 x Hygiene kit HY83
1 x User instruction
MT73H7A4D10EU GB EN352-1:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
19.3 25.0 34.8 37.4 36.1 40.4 36.4
33
Standard deviation (dB)
2.5 1.9 2.6 3.5 3.7 2.4 4.0
Assumed Protection Value (dB)
16.8 23.1 32.2 33.9 32.4 38.0 32.4
H=34 dB M=31 dB L=25 dB
MT73H7B4D10EU GB EN352-1:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
17.7 23.9 32.5 36.2 35.6 39.5 37.1
32
Standard deviation (dB)
2.8 3.1 3.9 3.1 2.5 2.9 2.3
Assumed Protection Value (dB)
14.9 20.8 28.6 33.1 33.1 36.6 34.8
H=35 dB M=30 dB L=22 dB
MT73H7P3E4D10EU GB EN352-3:2002
Frequency (Hz)
125 250 500 1000 2000 4000 8000 SNR
Mean Attenuation (dB)
18.1 23.2 32.0 36.4 34.2 40.2 34.5
32
Standard deviation (dB)
3.3 1.8 3.4 2.7 1.9 2.5 4.6
Assumed Protection Value (dB)
14.8 21.4 28.6 33.7 32.3 37.7 29.9
H=33 dB M=30 dB L=23 dB