Use And Care Manual

NOTE
When one of the above malfunctions
occurs, turn off the unit and check
for any obstructions. Restart the
Unit. If the malfunction persists, turn
off the unit and unplug the power
cord. Contact the manufacturer, its
service agents, or a similarly-qualified
person for service
Operating
Instructions
LED display
Shows the set temperature in °C or °F
and the Auto-timer settings. While on
DRY and FAN modes, it shows the room
temperature.
Shows Error codes and protection code:
E1 - Room temperature sensor error.
E2 - Evaporator temperature sensor error.
E3 - Condenser temperature sensor error
(select models).
E4 - Display panel communication error.
P1 - Bottom tray is full -- Connect the
drain hose and drain the collected
water away. If protection code
repeats, call for service.
Control Panel Features (cont.)
Page 8
NOTE
After 250 hours of operation, the filter
indicator light illuminates. This feature is
a reminder to clean the air filter for
more efficient operation. Press this
button for 3 seconds to cancel the
reminder.
Power button
Power switch on/off.