Use And Care Manual

Installation
Instructions
Window Installation Kit
Unit
adaptor
Window slider
adaptor
Exhaust hose Exhaust hose
assembly
Hook
Hole Seat
Lower
groove
Adaptor
Make sure the adaptor
is inserted into the
lower groove of the
air outlet.
1+2：
Bolt
1+2+3：
Bolt
Bolt
1+2+3+4：
Bolt
BoltBolt
1+4：
Bolt
Window Sliders
After assembly
Before assembly
Page 14
Step One: Preparing the exhaust hose
assembly
Press the exhaust hose into the window
slider adaptor and unit adaptor, clamp
automatically by elastic buckles of the
adaptors.
Step Two: Install the exhaust hose
assembly to the unit
Insert unit adaptor of the exhaust hose
assembly into the lower groove of the air
outlet of the unit with the adaptor hook
aligned with the hole seat of the air
outlet and slide the exhaust hose
assembly down along the direction
indicated by the arrow.
Step Three: Preparing the Adjustable
Window Slider
1. Depending on the size of your
window, you may need to adjust the
size of the window slider.
2. If the length of the window requires
two or three window sliders, use the
bolt(s)
to fasten the window sliders
once they are adjusted to the proper
length.