Use And Care Manual

 Page 12 
Operating
Instructions
• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain, making sure that
there are no kinks that will stop the water flowing.
• Place the end of the hose into the drain.
• Select the desired humidity setting and fan speed
on the unit for pump draining to start.
NOTE
The pump may generate a loud noise for the first 3~5
minutes of operation.
NOTE
The pump operation light blinks when a failure occurs.
Please turn off the unit and disconnect the power cord.
Check the following items:
• Cleaning the pump filter:
- Remove the bucket from the unit, take out the
pump, and clean the pump filter (See Fig. 12).
• Check if the drain hose is clean and free of debris.
• Empty the water from the bucket.
• Check the hose connection and the bucket for
proper assembly. If the error persists, contact
Customer Service.
Fig. 12
NOTE
Do not use the pump operation when the outdoor
temperature is equal to or less than 0°C (32°F),
otherwise ice may form, blocking the hose and
causing the unit to stop operating.
Make sure to empty the bucket at least once a week
a week when using the pump draining feature.
When the pump draining feature is not being used,
remove the pump drain hose from the outlet.
Filter of the pump