Use and Care Guide

Typical Installations
Installation Key
1
Vertical Cap
9
90° Elbow
2
Storm Collar
10
Horizontal Cap
3
Flashing
11
Wall Thimble
4
Cathedral Ceiling Support Box
12
Ceiling Support Firestop Spacer
5
Straight Length Pipe
13
Tee w/Clean-Out Tee Cap
6
45° Elbow
14
Wall Strap
7
Appliance Adapter
15
Attic Insulation Shield
8
60” Flexible Length
• Refer to our Typical Venting Installation drawings to select the appropriate component
parts for your installation.
• The inner pipe diameter should match the outlet size of the appliance. For installations
that require 4” vent and the appliance has a 3” outlet, use an Increaser Adapter 3”-4”.
• Check the appliance manufacturer's installation instructions to conrm which types
of vent congurations are permitted (i.e. horizontal, vertical, chimney reline, etc.).
Also, check for any venting restrictions such as maximum horizontal run, minimum and
maximum vertical rise, maximum oset, etc.
• Be re safe! Maintain the minimum clearances (air-space) between
the vent pipe and nearby combustibles, as specied in the appliance
manufacturer's installation instructions. Use proper support and brac-
ing. Follow local building codes and have your venting system inspected.
Straight Length Pipe
Tee with Clean-Out Tee Cap
Wall Thimble
Appliance Adapter
Wall Strap
90° Elbow
Round Horizontal Cap
77
44
11
55
1313
22
33
Cathedral Ceiling
Stove Installation
Pellet Insert
8
2
1
5
5
3
7
Masonry Chimney
Relining
1
2
9
3
13
13
5
7
Attic Oset
1
3
6
7
5
2
15
12
13
Through-The-Wall
55
1010
1111
77
Through-The-Wall
Vertical Rise
9
13
11
10
7
5
PelletVent Pro | Pellet Chimney
Simpson Dura-Vent | www.duravent.com
95