INSTRUCTION MANUAL EGG CHAIR
• • • BEFORE INSTALLATION Please list all parts as below first to check if any part is missing and make assembly easier. Do be careful that some parts are heavy and sharp. • • •• Please follow the assembly steps to install the product, if you find spare parts left, don't be worried, the left spare parts are prepared for bad ones if occurred. Once you hand tighten all of your bolts into place, we are going to use our wrench to fully tighten into place.
ASSEMBLY PARTS REQUIRED C 1 C D 1x 1x D NOTE: Gently pull back part C and take it out! 2 C K K M6x20 4x NOTE: Gentle force may be required for the mounting holes of the canopy frame to align with the seat frame.
ASSEMBLY PARTS REQUIRED A 3 B A 1x 1x NOTE: padded end should face forward. B Assemble the corresponding stand by telling sticker A and B 4 J M6x45 4x J TIP: Do not fully tighten hardware .
ASSEMBLY PARTS REQUIRED I 5 I 6 2x G H 1x J 1x M6x45 4x J H TIP: Do not fully tighten hardware . G NOTE: Assemble Part G & H as showed.
ASSEMBLY PARTS REQUIRED 7 FRONT BACK TIP: Please tighten all bolts! 8 E E F F 1x 1x
WARM TIPS ！ Warm Tips： If you have any problem with this product or our service, please don't hasty in writing negative review or feedback. Please welcome to contatct us right away, our service team will response within 24 hours , and we will try our best to help you. Thank you for giving us a chance to improve the product and our service. ••• ••• ••• CARE & MAINTENANCE Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish.
