User manual

'
e
PEll 9420 LED WORK LIGHT USER MANUAL
& CAUTION, READ THIS NOTICE BEFORE USE: Keep fingers dear of moving parts at all times - failure to
eomply eould result in injury.
DEPLOYMENT OPERATION
1. To deploy, hold the produet off the ground using the hand grip on the head eowling a nd rotate l eg latchin ",
in direetion indieated on arrow on the main extrusion bcxly (see Fig.1). The legs I. 'lill s prin g 0
2. Onee all three legs have released, move the deployment eollar downwards and the legs \! .
body to form a stable tripod base. Slide the deployment eollar into the reeess on the tra,--l
position (see Fig. 2).
, '--
, ' =.
MAST OPERATION
1. Onee deployed, release the elamps in order (Io·.· .. est firs:
and raise to the desired height (see Fig. 3) then d amn
to hold in plaee.
2. To eollapse the mast, reverse the proeedure
& Take care to keep fingers clear of moving parts.
LIGHT OPERATION
& CAUTION: DO NOT DIRECT LIGHT INTO EYES.
1. Press keypad onee for full power
2. Press again for half power
3. Press again to switeh off
2t
1
_____ .' Fig. 3