Installation Guide

ManualsBrandsPELHAM & WHITE ManualsKitchenBryn 16-Gauge Stainless Steel 30 in. Single Bowl Undermount Kitchen Sink with Farmhouse Faucet, Bottom Grid, Drain

Product Features

• High quality 16-Gauge 304 stainless steel alloy

• Sound deadening rubber pads and undercoating

• 10mm/0.4” radius corners for easy cleaning

• Includes stainless steel wire grid

• Includes stainless steel strainer drain

Unpack and inspect your sink upon delivery to avoid costly contractor delays

Rough-In Dimensions

Observe all applicable plumbing codes in your municipality

This sink is intended only for under-counter installations of solid-surface composite or natural

stone countertops. It should never be installed in laminated countertops. Thus, specialized

tools are required. It is highly recommended that this product be installed by professionals.

Section A-A

10”

9.6”

4.7”

16”

18”

1” 28”

30”

3.5”

4.5”

MINIMUM CABINET SIZE:

AT LEAST

33” WIDE

Model(s): PWS101 / PWS101-A

PWS101-C / PWS101-D

Summary of content (8 pages)

PAGE 1
MINIMUM CABINET SIZE: AT LEAST Model(s): PWS101 / PWS101-A PWS101-C / PWS101-D 33” WIDE Unpack and inspect your sink upon delivery to avoid costly contractor delays Product Features High quality 16-Gauge 304 stainless steel alloy Sound deadening rubber pads and undercoating 10mm/0.
PAGE 2
Installer: Installation • Template supplied with product is for reference only. Be sure to double check with the actual sink before cutting opening. Be sure to properly allow clearance for the mounting hardware, faucet, and other sink accessories. • Mounting anchors and brackets have not been supplied with this product, it is always best to use your own preferred methods of sink securement and attachment, given the different applications and countertop materials that may be involved.
PAGE 3
Dual-Mode Pull-Down Sprayer Model: PD222-SS Product Features • • • • • • Stainless steel PVD finish Ceramic disc cartridge Dual-mode metal sprayer Lever style handle Integrated supply lines with 3/8” compression connections Max flow rate: 1.8 GPM @ 60 PSI BEFORE INSTALLATION / ANTES DE LA INSTALACIÓN If you contact Customer Service, you will need the Model#, Serial Number and Date Code. Please locate the Product ID tag and Serial number tag.
PAGE 4
HELPFUL TOOLS (NOT INCLUDED) / HERRAMIENTAS ÚTILES (NO SE INCLUYEN) ASSEMBLY INSTRUCTIONS / INSTRUCCIONES DE ENSAMBLAJE 3 Unscrew the pre-assembled guide washer screws on guide washer until they are flush with the face of the guide washer. Retire los tornillos preensamblados en la arandela guía hasta que estén al ras con la cara de la arandela guía.
PAGE 5
ASSEMBLY INSTRUCTIONS / INSTRUCCIONES DE ENSAMBLAJE 6 8 9 7
PAGE 6
TROUBLESHOOTING / SOLUCIÓN DE PROBLEMAS PROBLEM PROBLEMA POSSIBLE CAUSE CAUSA POSIBLE Leak from under handle. Damaged cartridge. Goteo debajo de la llave. El cartucho está dañado. Inconsistent water flow pattern. Cartridge needs to be replaced. El flujo de agua es irregular. Se necesita reemplazar el cartucho. CORRECTIVE ACTION ACCIÓN CORRECTIVA Remove handle. Replace cartridge. Retire la manija. Reemplace el cartucho. Remove handle assembly, trim cap and locking nut.
PAGE 7
WARRANTY / GARANTÍA The manufacturer warrants this faucet to be free from defects in workmanship and material present at time of shipment from the factory for a limited lifetime from the date of purchase. This warranty applies only to the original purchaser. The manufacturer agrees to correct such defects at no charge or, at our option, replace the faucet with a comparable or superior model. You may be required to present a copy of your sales receipt as proof of purchase.
PAGE 8
REPLACEMENT PARTS LIST / LISTA DE PIEZAS DE REPUESTO For replacement parts, call our customer service department. Para obtener piezas de repuesto, por favor póngase en contacto con Servicio al Cliente. 8.