Installation Guide

TRADITIONAL DECK MOUNT TUB FAUCET

Notes:

1. Please ensure all local plumbing and building codes are observed when installing

these faucets.

2. Water supply lines must be roughed in on 8” centers.

T-FB1

Union Nut

Washer (10)

T-DLBO

Step 3

Step 1

Attach T-DLBO deck elbows to union on the

Attach spout by inserting the spout inside the body

until flush. Secure by threading the setscrew

included in the parts bag into the back of the faucet

body and tightening using the supplied hex wrench.

Step 2

Screw #11 handle hubs onto hot and cold cartridges

#9 and #17. Disassemble handle caps and install

the handles onto hubs by securing with screw

included. Replace handle caps.

back of the faucet body using one #10 rubber

gasket on each elbow

T-FB1

Union Nut

T-DLBO

Rubber Seal

Washer (20)

Lock Nut (21)

Step 4

Insert faucet through holes in tub rim with #20

seal washers above the deck and secure with

#21 locknuts. NOTE: If your tub does not

have faucet holes, use a 1” hole saw and drill

holes in deck centered across the overflow

drain hole on 8” centers.

T-HCRS

T-HPLV

White Porcelain

T-HLVR

Setscrew

Spout