Operation Manual

29 INSTALLATION
Electrical connection
Two or three phases.
Combination of oven 350 with Pelgrim cooker
(see fig. 5)
If the oven is built under a hob, it is
recommended that you leave a space of about
1 cm between the top of the dashboard and
the underside of the worktop.
■ Connect the oven to the electricity supply.
■ Slide the oven 2/3 into the cupboard.
■ Remove the protective devices that secure
the cardan joints during transport (see fig. 6).
■ Slide the cardan joints onto the oven’s tap
pins and snap them in place (fig. 7).
■ First fit the plastic caps in the holes of the
oven frame and then screw the oven to the
kitchen cabinet.
■ Check that the cardan joint is working.
fig. 5
L1 L2 L3 N
L1 L2 N1 N2
1234512345
595
596
600
560
550
fig. 6
klick
fig. 7